Uber has taken the first step toward relaunching its self-driving cars on Pittsburgh-area streets four months after a fatal accident involving one of the cars in Arizona.
A spokeswoman said the company put a handful of vehicles back on the road at noon Tuesday, with some safety modifications to the cars and driver training. But for now, the cars won’t be free of human control or respond to ride-hailing calls.
The rollout, taking place only in Pittsburgh where the bulk of Uber’s engineering outfit and test track is located, will run the cars only in manual mode with two safety operators called “mission specialists” in the front seat. One of the operators will have their hands on the wheel at all times and the other will document any incidents or issues for future adjustments.
A car in autonomous mode is operated or driven without active physical control by a person sitting in the driver’s seat, while a driver operating in manual mode has the ability to brake, turn the steering wheel or control other operations.
“Building best-in-class self-driving technology will take time, and safety is our priority every step of the way,” Eric Meyhofer, head of Uber Advanced Technologies Group, wrote in a blog entry posted to Medium.com Tuesday.
Meyhofer outlined some of the changes that have been made to the cars since the fatal accident in Tempe, Arizona, in March.
Elaine Herzberg was struck and killed by a self-driving car as she crossed a darkened road outside of the crosswalk. A 300-page investigative report by the National Transportation and Safety Board showed the driver had been streaming a television show for more than 40 minutes before the accident while the car was in autonomous mode.
Uber halted the program in all of its test markets to launch a safety review of the cars and training. The cars for now are not being reintroduced in the other test markets including San Francisco and Toronto.
Meyhofer said the cars will now have driver-monitoring systems that alert a remote monitor if the drivers are not being attentive. Uber’s collision avoidance system, which was already built into the cars, will now remain enabled during manual driving.
The in-car front tablet that is used to show traffic patterns and upcoming directions has been modified “to further reduce potential distractions while the vehicle is in motion.” The details of those modifications were not released, and it was unclear if that meant a driver could not stream television as was found in the March accident.
The company also increased driver training at its test track near Pittsburgh. And Meyhofer said the Pittsburgh roll-out will help the company make further adjustments by creating real-life scenarios for driver training. The company would not specify how many cars are being put on the streets in the rollout.
- Uber Ends Self-Driving Program in Arizona Following Fatality
- Uber Disabled Brake of Self-Driving Car in Arizona Fatal Crash
- Regulators Try to Navigate Legal, Social, Safety Issues Raised by Autonomous Vehicles
- Daimler Deploying Self-Driving Taxis in California Test Program
- Self-Driving Waymo Part of 5-Vehicle Crash in Arizona
- GM Settles Suit with Motorcyclist Hit By Autonomous Vehicle in California
- Police Say Uber Driver Was Streaming Hulu Before Self-Driving Car Crash in Arizona
Was this article valuable?
Here are more articles you may enjoy.